http://www.zamtas.com.au/img/p/8/6/4/864-thickbox.jpg

Speed Bump Series

This type of road-blocker is designed specifically for purposes of effective vehicle access control implementation. Various modifications as well as two installation options: surface or submerge, makes this type of a roadblocker a definitive solution to match large part of tasks.

More details

Speed Bump With Rising Kerb Road Blocker

This type of road-blocker is designed specifically for purposes of effective vehicle access control implementation. Various modifications as well as two installation options: surface or submerge, makes this type of a roadblocker a definitive solution to match large part of tasks. This set includes “protective curtain” that secures operating performance of a road-blocker also it protects equipment from any harmful external influences.

With a surface mounting installation type, SPEED-BUMP provides both functions of a road blocker, as well as a speed bump. In this case, to ensure secured vehicle pass of a SPEED-BUMP, equipment should be installed in set with entrance and exit ramps. These ramps are provided in two modifications: 

1) “short” usually applied to driveways with intensive traffic of heavy vehicles (trucks, buses etc);
2) “long” designed for SPEED-BUMP passing of vehicles with little road clearance.

SPEED-BUMPS are mounted with the help of anchors / land ties. We recommend installing road blocker in combination with barrier or double light traffic indicator. In addition roadblocker’s control box provides the possibility of induction loops operation support.

Due to opportunity of “combined modules” principle implementation, road-blocker’s design provides an option to block driveways of significant width. Modules have widths of 2 m and 3 m and can be combined in different ways (2+2, 2+3+2, 3+3+3 etc). In this regard, SPEED-BUMP solution is well applicable to the widest range of vehicle access control project purposes.

Technical Specifications

Installation type

On the roadbed* or with road surface submerge

Drive

HPU integrated

Location of hydrostation

Build-in

Rising height

350 mm

Width of blocked driveway

2

3

Dimensions, WxHxL, mm

2000x1040x118

3000x1040x118

Dimensions with front and side ramps*, WxHxL, mm

2600x2200x118

3600x2200x118

Maximum load per axis

Up to 15 tons

Material

Structural steel

Coating

Signal yellow-black coating

Rising time

5 sec

7,5 sec

Lowering time

5 sec

7,5 sec

Power supply

~ 220 V; 50 Hz

Power consumption

550 W

Equipment protection class

IP 55

Control box protection class

IP 67

Weight

385 kg

570 kg

Temperature conditions

From -10˚C to +50˚C

Temperature conditions (with optional heating system)

From -30˚C to +50˚C

Light indication

Build-in LED

Impact resistance

40 kJ

Penetration resistance

130 kJ

Blocking in raised position

Hydraulic lock in the hydrostation

Manual emergency release

Hechanical manual release device

Connection cable (to be delivered additionally)

Cable 16*0,75 mm

Operating mode

Intensive



* surface installation requires ramps to be in set
 

16 other products in the same category: